Round 5 Report: Stacey Nesbitt

August 19-22, Canadian Tire Motorsport Park, ON was the final round of the 2017 Mopar Canadian Superbike Championship.

Being another double header, qualifying was again on Friday afternoon. With the Liqui Moly Pro Sport Bike qualifying schedule changed to the last session, Superbike qualifying was used to get more track time.

“The wind was really strong and gusty which pushed the bike around going into the turns. It was unpredictable going through turns 1, 2 and 4. I eventually qualified 10th with my position changing on my pit board every time I came around” said Stacey. 7th to 10th was covered by 0.2 seconds

Saturday morning confirmed a mechanical issue that could not be fixed at the track.

Knowing there was a limited amount of time left for the engine, it was decided to only try to get through the Pro Sport Bike races. Having to skip practice, it was straight into the first race of the weekend.

A poor start in Liqui Moly Pro Sport Bike race one resulted in Stacey coming around in 12th on the first lap on her BLK RDR by Motovan/FTR CBR600RR. Improving her time from qualifying, she moved back up into the top ten to eventually finish 8th. 

“It was a four way, race long battle and it was a good race with the guys. I knew they were right on my tail the whole race and pushing hard” said Stacey. “Messing up my start put me further back than I wanted so I’m focused on getting a better start in race two. The bike was definitely running hotter in the race”. Stacey’s fastest lap in the race put her 9th on the grid for Sunday’s race.

After the race, a few suspension changes were made and the team decided to do try four laps in the Sunday morning Superbike warmup to test it.

Getting a much better launch off the start in Liqui Moly Pro Sport Bike race two Stacey moved up into 7th place. She managed to catch back up to the group battling for 4th position. In the process she set a number of personal best lap times. With three laps remaining the bike’s temperature was running very high.

“I noticed the power off the corners wasn’t the same as it had been. When I checked the temperature on the back straight and it was 114°C! It made me a little bit nervous for the remaining laps but the checkered flag came out just in time. We managed to bring it home in the end” said Stacey. She finished 8th again but this time the gap from 4th to 8th was covered by 3.5 seconds.

The result saw Stacey move up to 7th place in the final Liqui Moly Pro Sport Bike championship standings. “It was a very difficult start to the season but we kept plugging away and improved each round. I am satisfied with the last two rounds running closer to the front pace and setting personal best lap times in the process”.  

“I have to say a big thank you to FTR (Pat) for all his hard work before and during the season. To Motovan Corporation for supporting me through their BLK RDR by Motovan program. To Corndog (Jon Cornwell) for setting up the bike, R&M Electrical, my supporters club and product support sponsors. To the CSBK staff, medical staff, volunteer corner workers and photographers. Last but not least to my Mum and Dad. Thank you all for making my 2017 season possible”.

Support for this round: BLK RDR by Motovan, FTR, R&M Electrical

Product Support:  Shoei Helmets North America, TCX Focus on Boots, Five Advanced Gloves, Olympia Moto Sports, Forsaken Motorsports, SpeedAngle, Physical Park, 613 Motorsport, Powersports Canada, SBS Brakes

Thanks to: Pat Milligan, Jon Cornwell, the Stacey Nesbitt Supporters Club, Mum & Dad


To keep up to date on Stacey Nesbitt, visit her social media at;  





You Tube:

From a press release

Disclaimer: Press releases that are posted in this section of are received from outside sources, and we will not be held responsible for the accuracy of the information contained therein.

If you have a press release you would like to see on, please send it by email to Please note that press releases are posted as a courtesy and at our discretion. Proper series name and official class names must be used. Include a photo that you have the rights to use - unfortunately, we are not able to post images with watermarks. Not all submitted press releases will be posted.